Everything you need to develop and verify your high-speed digital interfaces is contained in these ultra-portable test and measurement instruments. They will forever change the way you think about developing and verifying Gbps digital and mixed-signal algorithms, and they will allow you to measure signals in ways that were not possible in the past. Each personalized SerDes tester is equivalent to multiple hardware instruments, containing everything that you need to make high-performance measurements like bit error rate testing, signal generation, and signal measurement.

Ideal for

  • Parallel PHY validation of serial bus standards
  • Receiver sensitivity and stressed eye generation
  • Transmitter characterization and optimization
  • Interface test of electrical and optical media
  • Plug and play system validation
  • Timing verification

Key Features at a Glance

  • Up to 32 pattern generators and error detectors per tester
  • Up to 32 Gbps using NRZ coding and 56 Gbps using PAM4 coding
  • Complete suite of jitter injection sources including SSC and wander generation
  • Complete suite of equalization and transmit device analysis
  • Ultra-compact form factor

Testers

SV7C-eDP Analyzer
SV7C-eDP Analyzer
Complete analysis of eDP v1.5 and DP v2.1 systems in HBR and UHBR
SV7C Personalized SerDes Tester
SV7C
All-in-one, phase-aligned bit error rate tester (BERT) and protocol exerciser and analyzer
SV5C-eDPRX from a bird's eye view
SV5C-eDP Analyzer
Complete analysis of eDP v1.5 and DP v2.1 systems in HBR
SV5C-eDP Generator
SV5C-eDP Generator
High-performance generator for eDP v1.5 and DP v2.1 systems in HBR
SV5C-DPRXCPRX
Combo MIPI D-PHY/C-PHY analyzer — ultimate product for dual roadmap development
SV5C-CPRX
Ultra-portable, high-performance MIPI C-PHY analyzer
SV5C-DPRX
Ultra-portable, high-performance MIPI D-PHY analyzer
SV5C-DPTXCPTX
Combo MIPI D-PHY/C-PHY generator — ultimate product for dual roadmap development
SV5C
SV5C-12
Highly parallel tester for applications up to 12.5 Gbps
SV3C DPRX-CPRX
SV3C-DPRXCPRX
Combo MIPI D-PHY/C-PHY analyzer — ultimate product for dual roadmap development
SV3C DPTX-CPTX
SV3C-DPTXCPTX
Combo MIPI D-PHY/C-PHY generator — ultimate product for dual roadmap development
SV3C-CPRX
SV3C-CPRX
Ultra-portable, high-performance MIPI C-PHY analyzer
SV3C-CPTX
Ultra-portable, high-performance MIPI C-PHY generator
SV3C-DPRX
Ultra-portable, high-performance MIPI D-PHY analyzer
Shown: SV3C-DPTX D-PHY Generator
SV3C-DPTX
Ultra-portable, high-performance MIPI D-PHY generator
SV3C-14
Highly parallel tester for DDR, clock forwarded, and embedded clock applications up to 14.1 Gbps
SV3C-12
Highly parallel tester for DDR, clock forwarded, and embedded clock applications up to 12.5 Gbps
SV3C-8
Highly parallel tester for DDR, clock forwarded, and embedded clock applications up to 8 Gbps
SV3C-4
Highly parallel tester for DDR, clock forwarded, and embedded clock applications up to 4 Gbps
SV2C
SV2C-32
8-Lane, 32 Gbps for high-end SerDes applications
SV2C
SV2C-28
8-Lane, 28 Gbps parallel tester for ASICs, optical transceivers, and high-end SerDes applications
SV1C-14
General purpose SerDes tester for clock forwarded and embedded clock applications up to 14.1 Gbps
SV1C-12
General purpose SerDes tester for clock forwarded and embedded clock applications up to 12.5 Gbps
SV1C-8
SerDes tester for applications up to 8 Gbps
SV1C-4
SerDes tester for applications up to 4 Gbps

Accessories

PV2 Probes
PV2 Universal Active Probe
Probing Solution with 8 GHz Bandwidth
CRTB
CRTB
MIPI C-PHY Reference Termination Board
PV1 Active Probe
PV1 Universal Active Probe
Oscilloscope and protocol analyzer probing solution for multi-Gbps applications
PV1PSU
PV1PSU
PV1 power supply unit (supports up to 10 probes)
CABLE MXP-MXP
CABLE-MXP-MXP (305 mm / 24″)
Huber+Suhner 8x2 MXP-to-MXP Harness (305 mm / 24")
CABLE MXP-SMA-F
CABLE-MXP-SMA-F
Huber+Suhner 8x2 MXP-to-SMA female (153 mm / 6")
CABLE MXP-MXP
CABLE-MXP-MXP (305 mm / 12″)
Huber+Suhner 8x2 MXP-to-MXP harness (305 mm / 12")
CABLE SMP-SMA
CABLE-SMP-SMA
Cable with male SMA and female SMP connectors (762 mm / 30")
CABLE MXP-K-M
CABLE-MXP-K-M
Huber+Suhner 8x2 MXP-to-K male (305 mm / 12")

Questions? Visit our FAQ page or contact us for any inquiries.